The mode of action of the BEGRID TG Geogrid is simple and effective. Loads within the structure are distributed across a wide area by the geogrid before being transferred to the subsoil, thus avoiding any overloading caused by point loads. This avoids the need for costly and laborious earthworks, such as soil improvement measures or the replacement of soil with load-bearing material.

BEGRID TG Geogrids produce excellent results in terms of reinforcement. BEGRID TG is made from UV-resistant polypropylene (PP) membranes. In the production process, a predefined pattern of holes is punched into the membranes, which are then stretched laterally and longitudinally. This forms a dimensionally stable geogrid with low elongation.

The extremely robust and bending-resistant grid structures consist of monolithic ribs and intersection points. In contrast to other types of geogrid, no jointed nodes are formed during production. The geogrids are instead formed from a single piece of material. These typical product characteristics make BEGRID TG particularly well suited for use in civil engineering and road construction.

To the product BEGRID TG Geogrid

The areas of application cover a broad spectrum, from traditional subgrade stabilisation through to noise barriers, embankments and wall structures.

One area that presents a special challenge with regard to slope stabilisation is the construction of extremely steep embankments and wall structures. The reinforcement must be designed to provide the structure with adequate stability, to ensure internal and external stability against collapse and to protect the exposed surface against erosion.

In the meantime, infrastructure elements also have to fulfil increasing expectations regarding their appearance and ecological compatibility, whilst also being financially viable. TERRAMESH system solutions, made of innovative steel wire elements, offer a reliable and economic alternative to traditional construction methods using concrete.

To the product TERRAMESH Green

BEVENT SK is a bond of a a three-layer vapour-permeable separating roof underlay membrane and a randomly arranged monofilament wire mat. The product is equipped with a self-adhesive butyl stripe.

BEVENT SK serves as a ventilation and spacer layer between the roof structure and the metal cladding. The open structure of the randomly arranged monofilament prevents the permanent accumulation of water, and the vapour-permeable roof underlay membrane provides the highest level of protection against the elements during the construction phase.

To the product BEVENT SK

REGUM structural protection mats, made of polyurethane-bonded granulated rubber, protect high-quality sealing layers in building and civil engineering applications from mechanical damage.

REGUM structural protection is available as mats or sheeting and can be laid quickly and easily. The material is permeable to water, weather-resistant, absolutely rotproof, and is able to support loads immediately after unrolling and laying.

To the product REGUM structural protection mats

Architecture, and in particular landscape architecture, is the art of the possible.

PEGASOFT safety surfaces gives architects the freedom to experiment with colour and shape, even for the smallest of projects. The designer's imagination can run wild.

The jointless PEGASOFT safety surface transforms drab areas into varied and colourful living space. PEGASOFT, is highly cost-effective.

Why not draw inspiration for your own project from our many and varied reference projects.

To the product PEGASOFT System Classic

A cost-effective green sports field that requires no mowing, fertilising or watering, and can be used the whole year round, whatever the weather, is the dream of every lawn sports enthusiast and all investors.

This dream finally became reality in the mid 1970s and is the reason for the subsequent worldwide success of synthetic turf. Over the years, different types of synthetic turf have been developed and constantly improved.

To the product BECOLASTIC synthetic turf systems