BEMAT Erosion Control Mats

BEMAT Erosion Control Mats provide reliable protection against erosion on slopes and inclined surfaces while supporting rapid and uniform vegetation growth.

HOME 5 Products 5 Geotechnical construction materials, geotextiles & geosynthetics 5 Erosion control mats 5 BEMAT Erosion Control Mats

Your advantages

Permanent erosion control

Excellent chemical and microbiological resistance

Easy to lay and to cut

General

Inclined earthworks such as embankments, noise barriers and riverbanks are particularly vulnerable to erosion until the fill material has fully consolidated and vegetation has become established. Heavy rainfall events can cause extensive erosion damage and slope failures during this phase, often resulting in high repair costs. Through early planning and the targeted use of erosion control measures, these risks can be significantly reduced while supporting safe and sustainable greening.

BEMAT Erosion Control Mats are three-dimensional mats comprising a geonet core made from polypropylene (PP) monofilaments. The mats are used wherever the natural growth of permanent, thick vegetation cannot be ensured or would take a long time and where a rot-proof erosion control system is therefore required.

The substrate layer is held securely in place, providing effective protection against erosion and washing out. This is particularly important in the initial stages of vegetation growth and creates the basis for permanent root growth.

BEMAT Erosion Control Mats can be used on slopes with gradients of up to 1:1.5.

BEMAT RF Erosion Control Mats combined with a geogrid have been specially developed to cope with the specific problems presented by very long or very steep slopes. The geogrid absorbs the calculated tensile forces. This prevents the surface of the slope from sliding downwards.

BEMAT Erosion Control Mats are also successfully employed in water engineering. Installed in the bed or embankment areas of bodies of water, they prevent the earth and the top layer of substrate from slipping and prevent erosion caused by waves.

Functions

Erosion control

BEMAT Erosion Control Mats can be used to prevent the soil particles from being removed by water and wind. The growth of vegetation layers, which can often take years, is accelerated and protected by BEMAT Erosion Control Mats. The three-dimensional random structure of the fibres in BEMAT Erosion Control Mats gives the soil and seeds the support they need until natural growth can take over the task completely.

Applications

Inclined surfaces

In highway and water engineering there are many types of sloping earthworks that require efficient erosion protection.

Noise barriers, dams, dykes, rainwater retention basins, riverbanks and landfill sites are all typical fields of application for BEMAT Erosion Control Mats.

Erosion control mat laid on a slip plane parallel to the slope

Embedding trench
BEMAT Erosion Control Mat
Fill material

Retaining structures

A further area of application is in retaining structures. Retaining walls and noise barrier walls are now increasingly constructed using gabions or reinforced earth techniques. In order for these structures to blend optimally into their environment, quick and permanent greening of the visible surfaces is required. BEMAT RF Erosion Control Mats with an integrated geogrid provide the answer here. In contrast to the normal erosion control mats, erosion control mats with geogrids can absorb tensile forces.

In this type of application, the BEMAT Erosion Control Mats are laid in the construction formwork and thus form a bond with the structure. The result is a secure slope surface as a basis for suitable greening.

Reinforced erosion control mats laid on a slip plane parallel to the slope

Embedding trench
BEMAT RF Erosion Control Mat with integrated geogrid
Fill material

Data

Properties	W 13	W 20	W 20 RF 20	W 20 RF 35	W 20 RF 55	W 20 RF 80
Product type	Erosion control mats		Erosion control mats with geogrid
Raw material	Erosion control mat: PP		Erosion control mat: PP. Geogrid: PET
Thickness (mm)	13	19	15	15	15	15
Maximum tensile strength longitudinal (kN/m)	2	2	25	35	55	80
Areas of application
Dike and hydraulic structures			●	●	●	●
Landfill construction and contaminated sites		●	●	●	●	●
Green areas	●	●	●	●	○	○
Home gardens	●	●	○
Canal structures	●	●	●	●	●	●
Coastal and shore protection		○	●	●	●	●
Retention basins	○	○	●	●	●	●
Reservoirs	○	○	●	●	●	●
Road and traffic areas	●	●	●	●	●	●
Retaining structures	●	●	●	●	●	●
Ponds	○	○	●	●	●	●
Road construction	●	●	●	●	○	○

● suitable | ○ partly suitable (project-related assessment necessary)

Special types available on request.

Request further product information

Installation

The subgrade must be even and free of stones and lumps of earth.
The subsoil must contain sufficient humus for the vegetation to be able to grow. Otherwise, the surface must be covered with a humus layer at least 5 cm thick and screeded off to create an even surface.
The seed must be suited to the location and be sown evenly and in sufficient quantities.
The BEMAT Erosion Control Mats must lie in contact with the subgrade over their entire area, since growth and root development can only occur if direct contact is ensured.
The mats are fixed at grid intervals of approximately four to five fixing points per square metre, depending on the gradient.
The BEMAT mats are then strewn with a covering of fine humus soil.

No tensile forces may be introduced into BEMAT claw mats without geogrids.