PEGASOFT jointless safety surfaces

As a fall protection system, PEGASOFT allows architects, clients and design engineers the greatest possible freedom to experiment with form and colour and sets no limits for the imagination.

With 28 standard colours available, a wide range of patterns, blends and colour combinations can be created. This not only improves the visual appeal of the entire area, but also significantly improves the use of the safety surface.

PEGASOFT fall protection surfaces are suitable for playgrounds, sports and leisure facilities.

HOME 5 Products 5 Fall protection, edgings & surfacing 5 In-situ safety surfaces 5 PEGASOFT jointless safety surfaces

Your advantages

Many design and application possibilities

Consistent and uniform level of fall protection across the entire area

Long service life and excellent weather resistance

Cost-effective and sustainable overall concept

General

Three dimensional design

Compared to standard safety tiles, PEGASOFT makes it possible to create diverse and multi-faceted safety surfaces. Hills, troughs, waves and channels can be created with a gentle, ergonomic design and inclinations of up to 45 degrees, without any unwelcome edges or steps. With PEGASOFT it is also possible to create barrier-free safety surfaces. Wheelchairs and walking aids can be used on these surfaces without any problem at all.

Seamless construction on site

PEGASOFT jointless safety surfaces are installed in-situ by experienced installation teams in accordance with the specifications of the design engineers and clients. The surfaces comprise a highly elastic base and a colour-fast EPDM top layer. PEGASOFT safety surfaces can be installed quickly, cost-effectively and safely on a bound or unbound sub-base layer.

Safety with style

With PEGASOFT, the ratio of cost to achievable effect is optimal. PEGASOFT safety surfaces transform dreary areas into safe, colourful and varied spaces where people can live and play. Thanks to its excellent force reduction values, PEGASOFT guarantees the safety of all users and gives the operator peace of mind.

Three dimensional design

The PEGASOFT surface is made of through-coloured EPDM granules and is laid in-situ without any joints or steps. The surfaces therefore have a long service life and optimum properties with regard to use and maintenance. Even vandalism stands practically no chance against them.

Experience of how the surface performs in practice is what really counts, of course. This is where PEGASOFT safety surfaces demonstrate their quality. In practice, the actual service life of the wear-resistant, weatherproof and UV-resistant EPDM granulate far exceeds the warranty period, which makes the investment in PEGASOFT worthwhile in every respect.

Functions

Optimal fall protection properties

The main reason for installing safety surfaces is to protect users from serious accidents. At the same time, the surfaces should also offer endless possibilities for creative architectural design using shape and colour.

PEGASOFT, the jointless safety surface made of high-quality rubber granulate, meets these requirements to the highest degree. Thanks to our many years of experience, the possibilities for creating imaginative surface designs with optimum fall protection properties are practically limitless.

Low maintenance

sparen Safety surfaces are often constructed with loose fill material such as sand or bark mulch. Such surfaces require constant maintenance, however, and regular ongoing costs are incurred for the replacement of the loose material.

The maintenance costs for PEGASOFT safety surfaces are comparatively low. Taking into account the total costs over the years, PEGASOFT safety surfaces made of rubber granulate are significantly more economical than loose material. Moreover, the jointless safety surfaces offer a consistently high level of fall protection.

Technical details

Care and maintenance

With the right care and maintenance, PEGASOFT safety surfaces have a very long service life, even in intensive use. Superficial soiling, with soil, leaves or moss, for example, can be easily removed with a broom.

If the dirt cannot be removed in this way, a high-pressure washer with extension lance can be used for cleaning. The lance must be used carefully and be held at a sufficient distance from the surface to avoid causing any damage.

Mechanical cleaning machines must not be used. We also offer professional care and maintenance services, if required.

Tested safety

PEGASOFT fall protection surfaces are laid on site in thicknesses from 30 to 140 mm, for fall heights of up to 3.20 m, and are tested according to the standard DIN EN 1177 “Impact attenuating playground surfacing – Determination of critical fall height”.

Various thicknesses of the PEGASOFT safety surface layer have been tested, following a specified test procedure, to determine the critical fall height. The safety surface must remain below the upper limit of 1,000 HIC (Head Injury Criterion) for the reduction of serious head injuries. The certifications apply only if playground equipment tested according to DIN EN 1176 is used, however.

Fall heights

Tested according to DIN EN 1177:2018 Critical FH (HIC). For total thicknesses of up to 20 mm, a bound sub-base layer is required beneath the safety surface. For thicknesses greater than 20 mm, the sub-base layer can be either bound or unbound.

Applications

Single-layer structure

EPDM top layer 10 – 20 mm
Bound sub-base layer

Two-layer structure

EPDM top layer 10 mm
Base layer 25 mm
Unbound sub-base

Two-layer construction for all areas requiring fall protection

EPDM top layer 10 mm
Base layer 20 – 130 mm
Unbound sub-base

Seamless PEGASOFT safety surfaces made of granulated rubber provide the required level of safety for outdoor facilities and are suitable for a wide range of applications:

Playgrounds
Retirement homes
Retirement and care homes
Hospitals
Amusement parks

Swimming pools
Hotels and restaurants
Gardens and parks
Climbing walls
Pedestrian zones

Golf courses
Roof gardens
Multisport fields
Outdoor gyms

Colors

Pearl*

RAL: 1013

Eggshell*

RAL: 1015

Sand Yellow

RAL: 1002

Beige

RAL: 1001

Brown

RAL: 8024

Earth Yellow

RAL: 1006

Lemon Yellow

RAL: 1012

Orange*

RAL: 2011

Rose*

RAL: 3017

Red

RAL: 3016

Purple*

RAL: 4005

Blue Grey*

RAL: 5014

Turquoise Blue*

RAL: 5018

Teal*

RAL: 5024

Sky Blue*

RAL: 5015

Rainbow Blue*

RAL: 5017

Gentian Blue*

RAL: 5010

Hertha Blue*

RAL: 5002

Capri Blue*

RAL: 5019

Signal Green

RAL: 6032

Rainbow Green

RAL: 6025

Patina Green

RAL: 6000

Reseda Green*

RAL: 6011

May Green*

RAL: 6017

Light Grey*

RAL: 7035

Iron Grey*

RAL: 7011

Slate Grey

RAL: 7015

Black

RAL: 9004

*To avoid temporary colour changes, we recommend the use of lightfast PU binder.

The colours cannot be technically reproduced exactly. We will be happy to send you original colour samples if required.

Colour Designer

Design your own jointless safety surface in just a few steps

Simply mix and match the 28 different coloured granules to create your very own surface. You can view a virtual safety tile in 3D from different perspectives in order to check your results and at the same time evaluate the overall effect of your colour mixture in a real preview.

If your mix is perfect, you can save your PEGASOFT colour mixture in a gallery or conveniently download it as a PDF. Simply contact us via the enquiry function if you have any questions and we will be happy to answer them, provide offers and much more. The application is optimised for desktop computers.

To PEGASOFT Colour Designer

Installation instructions

PEGASOFT safety surfaces are installed only by experienced and specialised PEGASOFT installers. The installation companies authorised by BECO BERMÜLLER always carry out the installation work meticulously, professionally and cost-effectively.

As a service provider, we offer clients, designers and contractors a comprehensive package:

1. Expert advice during the planning phase
2. Fulfilment of the orders with perfect workmanship and expertise
3. High quality rubber granules made of extremely durable EPDM
4. Regional presence, making even relatively small projects cost-effective
5. Fall protection properties that meet the requirements of the project and the required certifications
6. Professional implementation of tender specifications and of the creative ideas of designers and clients
7. Short construction times and flexibility in adapting to specified deadlines